The Solar Attic Fan is a simple and environmentally sensible solution that can save you money. Powered completely by free solar energy, this sleek and efficient vent is both compact and quiet. Fully operational right from the box, it installs easily, with no electrical wiring, no expensive electrician and city permits. And let’s not forget powerful! Place it wherever you need improved circulation; attics, lofts, workshops, storage sheds, garages, even barns.

Attic venting is an important aspect in maintaining a healthy energy efficient home. Proper venting cools your roof extending the material life and reduces the load on your air conditioning system. Attic venting also increases fresh air circulation which reduces vapor build up generated by every day activities like showering and cooking.

Excess moisture trapped in your attic can cause a variety of problems from rust and rot to increased bacteria and mold counts which can have a direct impact on your respiratory health! Passive vents have been a part of building codes for years. Soffit vents, ridge vents and louvers rely on nature to provide sufficient air pressure and air movement. So the majority of the time your attic is stagnant and continues to build up heat and moisture.

1. Minimize backpressure of exhaust gases.
• AMERICAN DREAM incorporates an angled throat within the flashing that provides a venturi effect, which increases airflow.

• The AMERICAN DREAM Solar Attic Fan was designed from the ground up to minimize obstructions in the flashing and shroud.

2. Maximize the exposure of the sun to the solar panel.
• AMERICAN DREAM designed a mounting bracket that houses the solar panel that allows for angling the panel.

• AMERICAN DREAM offers an optional special order remote solar panel which is installed away from the attic fan housing. It is used in applications where there is limited sunshine where the unit is to be installed. The remote panel is installed in a sunny area, capturing maximum amount of sunlight and therefore achieving optimal attic fan performance.

3. Minimize the ambient temperature of the solar panel because power output rapidly declines as temperature increases.
• AMERICAN DREAM powder coats the entire assembly, inside and out, in a neutral gray color thus ensuring that it does not act like a heat sink.

• The solar panel mounting bracket allows for an envelope of cool air to continually circulate around the entire solar panel.

4. Adaptable to any location, roof type, in any environment.
• Our Solar Attic Fan is constructed of .080 (14 gauge) aluminum, the flashing and shroud are seamless ensuring weather tight installations.

• Stainless steel animal protection screen.

• Stainless steel hardware throughout.

• Powder coated to withstand any environment.

• Fifty year Neutral Cure silicone bonds the flashing to the roof.

Better by Design…The American Dream Solar Attic Fan is engineered to be the best, incorpoating the best features, the best materials and the best construction, making it the Natural Choice over our competition!

Adjustable Solar Panel
Our solar attic fan is designed with a mounting bracket that houses the solar panel allowing the panel to be angled for optimum performance. Many of our competitors offer a fixed solar panel which can hinder the units performance.

Powder Coated Inside and Outside
AMERICAN DREAM powder coats the entire assembly in a neutral gray color thus ensuring that it does not act like a heat sink. Many of our competitors either paint only the outside or do not paint the unit at all.

Aluminum Fan with 5 Blades
AMERICAN DREAM offers a five-wing precision balanced aluminum blade for the highest cfm output. Many of our competition offer only 3 or 4 blades and many are made of plastic.

Aircraft Grade Aluminum Flashing
AMERICAN DREAM solar attic fan flashings are manufactured from aircraft grade .080 gauge aluminum while many of our competitors flashings are manufactured from sheet metal or galvanized steel.

Aircraft Grade Aluminum Hood
AMERICAN DREAM solar attic fan hoods are also manufactured from air-craft grade .080 gauge aluminum while many of our competitors offer either polypropylene (plastic), sheet metal or galvanized steel.

Energy Efficient Solar Attic Fans Qualify
for 30% Federal Tax Credit

At American Dream we have always been committed to achieving energy performance in our products and energy savings for our customers. We are very proud that all of our Solar Attic Fan models exceed the required standards to be eligible for up to $1,500 Federal Tax Credit.

The Solar Attic Fan is a simple and environmentally sensible solution that can save you money. Powered completely by free solar energy, this sleek and efficient vent is both compact and quiet. Fully operational right from the box, it installs easily, with no electrical wiring, no expensive electrician and city permits. And let’s not forget powerful! Place it wherever you need improved circulation; attics, lofts, workshops, storage sheds, garages, even barns.

Attic venting is an important aspect in maintaining a healthy energy efficient home. Proper venting cools your roof extending the material life and reduces the load on your air conditioning system. Attic venting also increases fresh air circulation which reduces vapor build up generated by every day activities like showering and cooking.

Excess moisture trapped in your attic can cause a variety of problems from rust and rot to increased bacteria and mold counts which can have a direct impact on your respiratory health! Passive vents have been a part of building codes for years. Soffit vents, ridge vents and louvers rely on nature to provide sufficient air pressure and air movement. So the majority of the time your attic is stagnant and continues to build up heat and moisture.

1. Minimize backpressure of exhaust gases.
• AMERICAN DREAM incorporates an angled throat within the flashing that provides a venturi effect, which increases airflow.

• The AMERICAN DREAM Solar Attic Fan was designed from the ground up to minimize obstructions in the flashing and shroud.

2. Maximize the exposure of the sun to the solar panel.
• AMERICAN DREAM designed a mounting bracket that houses the solar panel that allows for angling the panel.

• AMERICAN DREAM offers an optional special order remote solar panel which is installed away from the attic fan housing. It is used in applications where there is limited sunshine where the unit is to be installed. The remote panel is installed in a sunny area, capturing maximum amount of sunlight and therefore achieving optimal attic fan performance.

3. Minimize the ambient temperature of the solar panel because power output rapidly declines as temperature increases.
• AMERICAN DREAM powder coats the entire assembly, inside and out, in a neutral gray color thus ensuring that it does not act like a heat sink.

• The solar panel mounting bracket allows for an envelope of cool air to continually circulate around the entire solar panel.

4. Adaptable to any location, roof type, in any environment.
• Our Solar Attic Fan is constructed of .080 (14 gauge) aluminum, the flashing and shroud are seamless ensuring weather tight installations.

• Stainless steel animal protection screen.

• Stainless steel hardware throughout.

• Powder coated to withstand any environment.

• Fifty year Neutral Cure silicone bonds the flashing to the roof.

Better by Design…The American Dream Solar Attic Fan is engineered to be the best, incorpoating the best features, the best materials and the best construction, making it the Natural Choice over our competition!

Adjustable Solar Panel
Our solar attic fan is designed with a mounting bracket that houses the solar panel allowing the panel to be angled for optimum performance. Many of our competitors offer a fixed solar panel which can hinder the units performance.

Powder Coated Inside and Outside
AMERICAN DREAM powder coats the entire assembly in a neutral gray color thus ensuring that it does not act like a heat sink. Many of our competitors either paint only the outside or do not paint the unit at all.

Aluminum Fan with 5 Blades
AMERICAN DREAM offers a five-wing precision balanced aluminum blade for the highest cfm output. Many of our competition offer only 3 or 4 blades and many are made of plastic.

Aircraft Grade Aluminum Flashing
AMERICAN DREAM solar attic fan flashings are manufactured from aircraft grade .080 gauge aluminum while many of our competitors flashings are manufactured from sheet metal or galvanized steel.

Aircraft Grade Aluminum Hood
AMERICAN DREAM solar attic fan hoods are also manufactured from air-craft grade .080 gauge aluminum while many of our competitors offer either polypropylene (plastic), sheet metal or galvanized steel.

Energy Efficient Solar Attic Fans Qualify
for 30% Federal Tax Credit

At  American Dream we have always been committed to achieving energy performance in our products and energy savings for our customers. We are very proud that all of our Solar Attic Fan models exceed the required standards to be eligible for up to $1,500 Federal Tax Credit.

Technology:

The AMERICAN DREAM Ultimate Opener ™ patented technology offers a traveling motor that attaches directly to the garage door. There is only one moving part. The motor glides quietly along the stationary track. It is stronger than a chain drive and quieter than a belt drive brought together in one state of the art design.

Features:

• Unique design: The synoris garage door opener has a powerful 24V DC-motor that travels along a stationary chain resulting in a extremely quiet garage door opener.
• Extremely durable opener due to the least amount of moving parts of any opener on the market. There is no moving chain or tooth belt and thus there are no wear parts like deflection pulleys.
• The motor sprocket is the only moving part. This system does not know any gear damages.
• Comes with a lifetime warranty on the whole unit and two years on all accessories.
• Eliminates unwanted sagging of chain or belt associated with conventional openers.
• Fully automatic force adjustment that will not allow a broken door to burn out the motor.
• Soft start and soft stop including a back jump to relive stress on motor and door.
• No maintenance required

• The maintenance free patented technology offers a traveling motor that attaches directly to the garage door. There is only one moving part.

• The 24V DC motor glides along a stationary track, resulting in the quietest and most durable opener on the market.

Enhance your product line with an opener that offers:

• Lifetime warranty

• The highest customer satisfaction

• State of the art technology

• Attractive design

• 550 Newton force (equals ½ HP)
• For doors up to 550 lbs.
• 24V DC Motor, allows up to 70 door movements per hour
• AM 315 MHz, HomeLink® compatible radio frequency
• 4 Button transmitter
• Photo eyes set
• DeLuxe wall station

Power-saving functionality

In times of increased electricity prices, advanced and energy-saving technology is more important than ever. Now AMERICAN DREAM garage
door operators combine both.
The “Dynamic Power System (DPS)” enables the operator to use only as much force and electricity as needed.
Due to an energy-saving toroidal core transformer, the operator requires less than 2W in standby mode.
With a typical operation of three open and close movements a day, a garage door operator only costs less than $1 per year!

AMERICAN DREAM radio control system _ comfort at the press of a button

Our radio control products ensure extra comfort with their low-interference and secure-transmission frequency of FM 868.8 MHz.
Open your garage door from the comfort of your car.
You only need one radio control system to operate all your home automation applications. In other words, your garage door, blinds,
awnings and roller shutters as well as other electrical and electronic devices can conveniently be operated via radio remote control.
Extremely secure the use of a 66 bit code length means it would take a lifetime to try out all combination options.
Extremely safe against interception, as every code is only used once and changes after every activation (“rolling code”).

Infiltration of Outside Air in Winter

MANY advantages exist in the AMERICAN DREAM ULTRA PROFORMANCE technology that are superior to conventional geothermal systems both the “open loop” and “closed loop” variety.

More Reliable.

1. Fewer parts to the system

2. Does not require a supply and return well.

3. Does not require a well pump or circulation pumps.

4. No water heat exchanger and associated valves to corrode, freeze and break.

More Efficient

AMERICAN DREAM ULTRA PERFORMANCE principle allows the refrigerant to come directly into contact with the earth, separated only by copper tubing. During winter, maximum heat transfer takes place at higher temperature than conventional ground loop technology without the maintenance and electrical cost of circulation pumps.

Less Maintenance

More Versatile

AMERICAN DREAM ULTRA PERFORMANCE systems can be installed in a more confined area than a conventional ground loop system, primarily because the heat exchanger coil is much more efficient at transferring heat to the refrigerant than a plastic earth exchanger

AMERICAN DREAM ULTRA PERFORMANCE GEOTHERMAL has its refrigerant evaporator / condenser in direct thermal contact with the earth from which heat is either extracted from during the heating mode or introduced to during the cooling mode of operation.

AMERICAN DREAM ULTRA PERFORMANCE GEOTHERMAL SYSTEMS working fluid is r410 a refrigerant and the copper ground loop is the primary heat exchanger. Such geothermal heat exchange is the most efficient and effective way of achieving heat exchange in heating and air conditioning systems.

The elimination of the secondary earth heat exchanger (typically plastic in nature) and its associated working fluid reduces the temperature difference required between the ground and the evaporating refrigerant yielding a higher suction pressure than a conventional system under similar circumstances and thus a higher efficiency.

Questions? Contact Us

Infiltration of Outside Air in Winter

MANY advantages exist in the AMERICAN DREAM ULTRA PROFORMANCE technology that are superior to conventional geothermal systems both the “open loop” and “closed loop” variety.

More Reliable.

1. Fewer parts to the system

2. Does not require a supply and return well.

3. Does not require a well pump or circulation pumps.

4. No water heat exchanger and associated valves to corrode, freeze and break.

More Efficient

AMERICAN DREAM ULTRA PERFORMANCE principle allows the refrigerant to come directly into contact with the earth, separated only by copper tubing. During winter, maximum heat transfer takes place at higher temperature than conventional ground loop technology without the maintenance and electrical cost of circulation pumps.

Less Maintenance

More Versatile

AMERICAN DREAM ULTRA PERFORMANCE systems can be installed in a more confined area than a conventional ground loop system, primarily because the heat exchanger coil is much more efficient at transferring heat to the refrigerant than a plastic earth exchanger

AMERICAN DREAM ULTRA PERFORMANCE GEOTHERMAL has its refrigerant evaporator / condenser in direct thermal contact with the earth from which heat is either extracted from during the heating mode or introduced to during the cooling mode of operation.

AMERICAN DREAM ULTRA PERFORMANCE GEOTHERMAL SYSTEMS working fluid is r410 a refrigerant and the copper ground loop is the primary heat exchanger. Such geothermal heat exchange is the most efficient and effective way of achieving heat exchange in heating and air conditioning systems.

The elimination of the secondary earth heat exchanger (typically plastic in nature) and its associated working fluid reduces the temperature difference required between the ground and the evaporating refrigerant yielding a higher suction pressure than a conventional system under similar circumstances and thus a higher efficiency.

Questions? Contact Us

Infiltration of Outside Air in Winter

MANY advantages exist in the AMERICAN DREAM ULTRA PROFORMANCE technology that are superior to conventional geothermal systems both the “open loop” and “closed loop” variety.

More Reliable.

1. Fewer parts to the system

2. Does not require a supply and return well.

3. Does not require a well pump or circulation pumps.

4. No water heat exchanger and associated valves to corrode, freeze and break.

More Efficient

AMERICAN DREAM ULTRA PERFORMANCE principle allows the refrigerant to come directly into contact with the earth, separated only by copper tubing. During winter, maximum heat transfer takes place at higher temperature than conventional ground loop technology without the maintenance and electrical cost of circulation pumps.

Less Maintenance

More Versatile

AMERICAN DREAM ULTRA PERFORMANCE systems can be installed in a more confined area than a conventional ground loop system, primarily because the heat exchanger coil is much more efficient at transferring heat to the refrigerant than a plastic earth exchanger

AMERICAN DREAM ULTRA PERFORMANCE GEOTHERMAL has its refrigerant evaporator / condenser in direct thermal contact with the earth from which heat is either extracted from during the heating mode or introduced to during the cooling mode of operation.

AMERICAN DREAM ULTRA PERFORMANCE GEOTHERMAL SYSTEMS working fluid is r410 a refrigerant and the copper ground loop is the primary heat exchanger. Such geothermal heat exchange is the most efficient and effective way of achieving heat exchange in heating and air conditioning systems.

The elimination of the secondary earth heat exchanger (typically plastic in nature) and its associated working fluid reduces the temperature difference required between the ground and the evaporating refrigerant yielding a higher suction pressure than a conventional system under similar circumstances and thus a higher efficiency.

Questions? Contact Us

• Swivel spray aerator with pause valve
• Powerful 1.5 GPM flow, controlled by proprietary flow compensator
• Great for washing dishes
• Pause action reduces flow to a trickle while keeping temperature consistent
• Control from soft spray to solid stream
• 10-year manufacturer’s guarantee
• Up-and-down action to change spray settings
• Rubberized grip for easy adjustment
• Internal design prevents clogging
• Saves 30% more water and energy then a standard 2.2 GPM aerator – that’s 7,665 gallons of water annually!
• Dual threads make for easy installation
• Meets or exceeds ASME standards
• C.S.A. certified
• Dual Standard Thread

• Lowest gallon per flush on the market. (0.8 Gallons/Flush vs the typical 4.0 Gallon/Flush)
• saves thousands of gallons per year

With its low-profile body, breakthrough patented hydraulic technology, and the quietest flush on the planet, the American Dream ultra efficient unique design has revolutionized the toilet market.

With its groundbreaking technology, the Am. Dream toilet delivers a powerful, effective, one-time flush. By harnessing the energy created by water filling the tank, this toilet uses a patented air transfer system to pressurize the bowl’s trapway. Once activated by simply pressing the flush button, the swift, powerful and quiet flush evacuates all waste in the bowl. Offered in both round front and elongated models and adaptable to fit a standard 12″ roughing installation, the StealthTM easily replaces your existing toilet, lowering water usage and utility bills.

The system is not only capable of functioning efficiently at varying water pressure levels, but it has no expensive parts to replace, further saving the customer money and reducing materials use. Completing its superior engineering, the modern, compact design make it ideal for both new construction and retrofitting projects. The toilet’s water and utility bill savings translate to impressive, real numbers. At a flush rate that saves 37% more water than a standard HET, this toilet saves up to 20,000 gallons and $101 per year* with regular use and up to 200,000 gallons and $1,013 in its lifetime*!

• 9-Jet Turbo Massage is adjustable:  gentle needle spray to forceful jet
• Consistent flow rate regardless of water pressure
• Non-removable flow compensator
• Non-aerating spray means less temperature loss with maximum energy savings
• Self-cleaning and maintenance-free
• Installs easily, by hand and without tools
• Corrosion-resistant, high-impact ABS thermoplastic body
• Meets or exceeds ANSI specifications
• 10-year guarantee

Infiltration of Outside Air in Winter

MANY advantages exist in the AMERICAN DREAM ULTRA PROFORMANCE technology that are superior to conventional geothermal systems both the “open loop” and “closed loop” variety.

More Reliable.

1. Fewer parts to the system

2. Does not require a supply and return well.

3. Does not require a well pump or circulation pumps.

4. No water heat exchanger and associated valves to corrode, freeze and break.

More Efficient

AMERICAN DREAM ULTRA PERFORMANCE principle allows the refrigerant to come directly into contact with the earth, separated only by copper tubing. During winter, maximum heat transfer takes place at higher temperature than conventional ground loop technology without the maintenance and electrical cost of circulation pumps.

Less Maintenance

More Versatile

AMERICAN DREAM ULTRA PERFORMANCE systems can be installed in a more confined area than a conventional ground loop system, primarily because the heat exchanger coil is much more efficient at transferring heat to the refrigerant than a plastic earth exchanger

AMERICAN DREAM ULTRA PERFORMANCE GEOTHERMAL has its refrigerant evaporator / condenser in direct thermal contact with the earth from which heat is either extracted from during the heating mode or introduced to during the cooling mode of operation.

AMERICAN DREAM ULTRA PERFORMANCE GEOTHERMAL SYSTEMS working fluid is r410 a refrigerant and the copper ground loop is the primary heat exchanger. Such geothermal heat exchange is the most efficient and effective way of achieving heat exchange in heating and air conditioning systems.

The elimination of the secondary earth heat exchanger (typically plastic in nature) and its associated working fluid reduces the temperature difference required between the ground and the evaporating refrigerant yielding a higher suction pressure than a conventional system under similar circumstances and thus a higher efficiency.

Questions? Contact Us